RD-Pro · Interactive manual
5 channels Up to 500 m range 9 + hours battery Folds flat
Charge
Charge fully with the USB cable.
Switch on
Press and hold the power button.
Choose channel
Press Channel until you hear sound.
Set volume
Turn the volume wheel.
Fold & store
Fold flat after use.
Headband
Headband
Adjustable and padded
Hinge
Hinge
Folds flat for storage
LED light
LED light
Shows the channel colour
Ear cushion
Ear cushion
Soft and replaceable
Controls
Controls
Power, Channel, volume, USB
Power
Hold: on or off
Channel
Press: next colour
Volume wheel
Turn: louder or softer
LED
Hold 2 s: LED on / off
USB
Charging port
9 + hours
A full charge lasts 9 + hours.
Charge many at once
Use a 10 to 100 port charging station.
LED off
Hold the volume / LED button 2 s.
Hygiene
Clean with wet wipes. Ear cushions are replaceable.
Transmitter on?
Switched on and music playing.
Same colour?
Headphone and transmitter on the same channel.
Volume & battery
Wheel not at zero, headphone charged.
Move closer
Stay within range of the transmitter.
Charge
A low battery weakens reception.
Other channel
Switch transmitter and headphones to another colour.
Connect your phone to the transmitter.
The RD-Pro does not appear in your phone’s Bluetooth list. The headphones receive audio by radio from the Dolly Digital transmitter.
Connect your phone to a compatible transmitter via Bluetooth, or use an audio cable. The T80Pro, T90Pro and TX20Pro support Bluetooth. Then set the headphones to the transmitter’s channel.
Connections and extra channels
This is an on-screen example. Use the buttons on your own equipment to set it up.
Channels 4 and 5 work with compatible special transmitters. Each audio source on a separate channel needs its own transmitter.
Your phone connects to the transmitter.
Use Bluetooth if your transmitter supports it, or connect a cable. The RD-Pro receives audio by radio, so you won’t find it in your phone’s Bluetooth list.
RD-Pro
5 channels Up to 500 m range 9 + hours battery Folds flat
Use Bluetooth if your transmitter supports it, or connect a cable. The RD-Pro receives audio by radio, so you won’t find it in your phone’s Bluetooth list.
Channels 4 and 5 work with compatible special transmitters. Each audio source on a separate channel needs its own transmitter.
