FD-Pro · Interactive manual

5 channels · 9+ hour battery · USB-C

Charge your headphones.

Connect the USB-C cable to your FD-Pro. Fully charge the headphones before using them for the first time.

Press PWR briefly to check the battery. The LEDs show the charge level.

Switch your headphones on.

Hold PWR until the LEDs light up. The button is on the ear cup, above the volume wheel.

A short press checks the battery. Hold PWR to switch the headphones on or off.

Match the transmitter’s channel.

Press CH/LED until your headphones show the same colour as the transmitter.

Red is channel 1, green 2, blue 3, yellow 4 and purple 5. Channels 4 and 5 require a compatible special transmitter.

Set the volume.

Turn the V+ / V− volume wheel. Each listener sets their own volume.

Start low and turn the volume up gradually until the music or speech is comfortable to hear.

Switch off and put away.

Hold PWR to switch the headphones off. Then fold them flat and put them away.

Wipe the headphones with a damp cloth. The ear cushions can be replaced.

CH/LED

CH/LED

Press CH/LED to change channels. Stop when the colour matches the transmitter.

To turn the lighting off, hold CH/LED for 2 seconds.

PWR

PWR

Hold PWR until the LEDs light up to switch your FD-Pro on. Hold it again after use to switch off.

Press PWR briefly to check the battery. The LEDs show the charge level.

V+ / V−

V+ / V−

Turn the wheel towards V+ for louder sound and V− for quieter sound.

Each listener controls their own volume. Ask participants to set it before the session.

LED ring

LED ring

The colour shows which channel your headphones receive. Match the transmitter’s colour.

CH1 red, CH2 green, CH3 blue, CH4 yellow, CH5 purple. Try this in the Channels tab.

Hinge

Hinge

The FD-Pro folds flat. Use the hinges to fold your headphones for storage after the session.

Switch off first by holding PWR. Then fold and put away.

USB-C / AUX

USB-C / AUX

Use USB-C to charge the battery. The AUX socket lets you listen through an audio cable.

The AUX socket takes a 3.5 mm audio cable. Fully charge before first use.

How do I check the battery?

Press PWR briefly. The LEDs show the charge level. Fully charge your headphones via USB-C before first use.

Can I turn the lighting off?

Yes. Hold CH/LED for 2 seconds to turn the LEDs off. Useful for a quiet session or a dark room.

Can I listen through a cable?

Connect a 3.5 mm audio cable to the AUX socket on your headphones.

How do I clean the headphones?

Wipe with a damp cloth. The ear cushions can be replaced. Fold and store the headphones after use.

Transmitter and music on?

Check that the transmitter is on and the audio source is playing.

Do the colours match?

Set the headphones and transmitter to the same channel.

Volume and battery OK?

Turn up the volume wheel. Charge the headphones if needed.

Move closer to the transmitter.

The FD-Pro receives audio up to 500 metres away in open space. Range also depends on the transmitter. Walls, metal and crowds can reduce it.

Change channels, then switch back.

Press CH/LED to select another channel, then return to the transmitter’s channel.

Fully charge both devices.

Charge the headphones and, if the transmitter has a battery, charge that too.

Connect your phone to the transmitter.

The FD-Pro does not appear in your phone’s Bluetooth list. The headphones receive audio by radio from the Dolly Digital transmitter.

Connect your phone to a compatible transmitter via Bluetooth, or use an audio cable. The T80Pro, T90Pro and TX20Pro support Bluetooth. Then set the headphones to the transmitter’s channel.

Connections and extra channels

This is an on-screen example. Use the buttons on your own equipment to set it up.

Channels 4 and 5 work with compatible special transmitters. Each audio source on a separate channel needs its own transmitter.

Your phone connects to the transmitter.

Use Bluetooth if your transmitter supports it, or connect a cable. The FD-Pro receives audio by radio, so you won’t find it in your phone’s Bluetooth list.

Your Dolly Digital FD-Pro

5 channels · 9+ hour battery · USB-C

The FD-Pro receives audio by radio from a Dolly Digital transmitter. Connect your phone to the transmitter.

Choose the same channel colour on the transmitter and headphones. Channels 4 and 5 require a compatible special transmitter.

Open PDF