FD-Pro-M · Interactive manual

HiFi: rich, clear sound · Auto mix: voice over music · ±30 m microphone range · 40 microphone channels

Charge

Headphone, microphone and receiver.

Mount

Click the microphone onto the headphone.

Plug in

Receiver into MIC on the transmitter.

Switch on

Microphone and receiver connect by themselves.

Talk

Everyone hears your voice and the music.

Headphone

Headphone

The light shows the channel colour. The mount holds the microphone. Press CH/LED to change channels. Hold PWR to switch the headphones on or off. Use V+ / V− to adjust the headphone volume.

Microphone

Microphone

Press − to lower the microphone volume and + to raise it. Hold − for 3 seconds to change the microphone channel. Hold + for 10 seconds to pair. Use the power button to switch the microphone on or off. Charge it through the USB port. A blue light means the microphone is on; a red light means it is charging.

Receiver

Receiver

Plug the 3.5 mm connector into the transmitter’s MIC input. Use the power button to switch the receiver on or off. Charge it through the USB port. A blue light means it is connected; a red light means it is charging.

Without mic

A normal HiFi headphone

Two instructors

Up to 2 mics per transmitter

Several mics?

Each its own channel

Low battery

Blue light flashes

Connect again

Hold + and switch on the microphone. Release when the blue light flashes. Hold the receiver power button 1 s. Blue light: connected.

Change channel

Hold − for 3 s. The blue light flashes fast. It reconnects by itself.

How it works

The microphone on your headphones sends your voice wirelessly to the receiver in the transmitter’s MIC input. The transmitter automatically mixes your voice over the music and sends both to all headphones. Your voice and the music both stay clear. Compatible transmitters shown in the guide are the T80Pro-Bluetooth, T90Pro-Bluetooth-XLR and TX20Pro-Bluetooth.

No sound

Receiver in MIC? Both on? Volume up?

Noise

Mic away from speakers. Mic volume down.

Too soft

Mic closer to your mouth.

Connect again

Hold + and switch on the microphone. Release when the blue light flashes. Hold the receiver power button 1 s. Blue light: connected.

Hold − for 3 s. The blue light flashes fast. It reconnects by itself.

How it works

The microphone on your headphones sends your voice wirelessly to the receiver in the transmitter’s MIC input. The transmitter automatically mixes your voice over the music and sends both to all headphones. Your voice and the music both stay clear. Compatible transmitters shown in the guide are the T80Pro-Bluetooth, T90Pro-Bluetooth-XLR and TX20Pro-Bluetooth.

FD-Pro-M

HiFi: rich, clear sound · Auto mix: voice over music · ±30 m microphone range · 40 microphone channels

The microphone on your headphones sends your voice wirelessly to the receiver in the transmitter’s MIC input. The transmitter automatically mixes your voice over the music and sends both to all headphones. Your voice and the music both stay clear. Compatible transmitters shown in the guide are the T80Pro-Bluetooth, T90Pro-Bluetooth-XLR and TX20Pro-Bluetooth.

Hold + and switch on the microphone. Release when the blue light flashes. Hold the receiver power button 1 s. Blue light: connected.

Open PDF