RD-Pro-M · Interaktívny návod
HiFi: rich, clear sound · Auto mix: voice over music · ±30 m microphone range · 40 microphone channels
Charge
Headphone, microphone and receiver.
Mount
Click the microphone onto the headphone.
Plug in
Receiver into MIC on the transmitter.
Switch on
Microphone and receiver connect by themselves.
Talk
Everyone hears your voice and the music.
Headphone
Headphone
The light shows the channel colour. Click the microphone on or off its mount and keep it close to your mouth. Press CH/LED to change channels. Hold PWR to switch the headphones on or off. Use V+ / V− to adjust the headphone volume.
Microphone
Microphone
Press − to lower the microphone volume and + to raise it. Hold − for 3 seconds to change the microphone channel. Hold + for 10 seconds to pair. Use the power button to switch the microphone on or off. Charge it through the USB port. A blue light means the microphone is on; a red light means it is charging.
Receiver
Receiver
Plug the 3.5 mm connector into the transmitter’s MIC input. Use the power button to switch the receiver on or off. Charge it through the USB port. A blue light means it is connected; a red light means it is charging.
Without mic
A normal HiFi headphone
Two instructors
Up to 2 mics per transmitter
Several mics?
Each its own channel
Low battery
Blue light flashes
Connect again
Hold + and switch on the microphone. Release when the blue light flashes. Hold the receiver power button 1 s. Blue light: connected.
Change channel
Hold − for 3 s. The blue light flashes fast. It reconnects by itself.
How it works
The microphone on your headphones sends your voice wirelessly to the receiver in the transmitter’s MIC input. The transmitter automatically mixes your voice over the music and sends both to all headphones. Your voice and the music both stay clear. Compatible transmitters shown in the guide are the T80Pro-Bluetooth, T90Pro-Bluetooth-XLR and TX20Pro-Bluetooth.
No sound
Receiver in MIC? Both on? Volume up?
Noise
Mic away from speakers. Mic volume down.
Too soft
Mic closer to your mouth.
Connect again
Hold + and switch on the microphone. Release when the blue light flashes. Hold the receiver power button 1 s. Blue light: connected.
Hold − for 3 s. The blue light flashes fast. It reconnects by itself.
How it works
The microphone on your headphones sends your voice wirelessly to the receiver in the transmitter’s MIC input. The transmitter automatically mixes your voice over the music and sends both to all headphones. Your voice and the music both stay clear. Compatible transmitters shown in the guide are the T80Pro-Bluetooth, T90Pro-Bluetooth-XLR and TX20Pro-Bluetooth.
RD-Pro-M
HiFi: rich, clear sound · Auto mix: voice over music · ±30 m microphone range · 40 microphone channels
The microphone on your headphones sends your voice wirelessly to the receiver in the transmitter’s MIC input. The transmitter automatically mixes your voice over the music and sends both to all headphones. Your voice and the music both stay clear. Compatible transmitters shown in the guide are the T80Pro-Bluetooth, T90Pro-Bluetooth-XLR and TX20Pro-Bluetooth.
Hold + and switch on the microphone. Release when the blue light flashes. Hold the receiver power button 1 s. Blue light: connected.
